It happens to careful people: the door swings shut, the key is on the kitchen table, and the evening stops. Our locksmith comes to Mount Dennis, confirms the home or shop is yours, opens the door without wrecking the lock, and stays long enough to make sure the key you have still works afterwards.
Toronto, Ontario
2021 census · what it means at the door
58%Older homes
About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.
Basement and side entries on older homes were often fitted long after the house was built, with whatever lock was on hand. Bringing those doors up to the standard of the front entry, and onto the same key, is a common and satisfying job.
23%
Single-detached houses make up about 23% of homes in Toronto (2021 Census).
Landlords and property managers dominate in attached housing, and they want keys organised. A locksmith sets up master systems so a manager carries one key while each tenant's key opens only their own door.
Locksmith services
Homes and businesses in Mount Dennis tend to need the same handful of things from a locksmith, so that is how the list is arranged: emergency openings, changing or rekeying locks, stronger hardware for people who want it, commercial doors and access, and safes. Car keys sit at the end for the households that need them.
Mount Dennis
Home Lockout ServiceThe moving truck has left, half the boxes are inside, and the single key the previous owner handed over turns the knob but not…
Lock Replacement & UpgradeThe lever on the side door droops toward the floor and rattles in your hand.
Smart Lock InstallationArthritis has made the small house key hard to grip and turn, especially with gloves on in January.
Mailbox Lock ReplacementSomeone tried to pry the little door on the mailbox open with a screwdriver, and though the mail sitting inside is untouched, the…
Safe Opening & Combination ChangePry marks circle the dial after an overnight break-in attempt, and the safe now refuses every number that used to open it, as if…
Master Key System DesignOn the warehouse floor, a shift supervisor's key opens the loading dock, the tool crib and the manager's office, though only the…
Access Control InstallationSomething went missing from the storeroom over a weekend, and when you ask who was in the building, the honest answer is anyone…
Panic & Exit HardwareThe daycare wants the yard gate and the classroom door alarmed so a staff member hears the moment it opens, without turning…
Car Lockout ServiceThe trunk is full of groceries, the cart is back in its corral, and the keys are sitting in the cup holder in plain view.Change or rekey
Deadbolts, cylinders, strikes and keys are the four things we look at on every home visit, in that order. A weakness in any one undoes the others.
High security
Anti-snap cylinders, hardened shrouds, sidebar mechanisms and ball-bearing drill protection are the vocabulary of high security hardware. We translate that into what it means for your door and stop at the level that fits the risk.
Mount Dennis
Home Lockout Service
The keypad on the smart lock blinks once and goes dark. The batteries have finally given up, your phone is at four percent, and the little backup key that came in the box is in a kitchen drawer on the other side of the door.
Home Lockout Service
Mount Dennis
When you call from Mount Dennis, a locksmith answers, not a dispatcher reading a script. He asks what the door is doing, tells you what the visit will likely involve, and arranges a time. The assessment and the price happen at the door, once he has seen the hardware. The same person who took the call is the one who does the work.
— Fairbank Lock Experts
Hours
Open 24/7
Businesses are locked out by people as often as by hardware. A keyholder is away, a former employee still has a key, a master key has gone missing, or the only spare lives in a drawer behind the locked door.
1 of 3
We ask for something that ties you to the premises: a lease, business card, or a call to the owner. Opening a shop for the wrong person is not a risk we take.
2 of 3
Storefront and office locks vary, so we choose the approach that leaves the hardware intact wherever possible. If the lock itself has failed, we tell you before opening it.
3 of 3
Once inside we check the lock, cut keys if needed and note anything that should be addressed later so your day can carry on.
The opening itself is often the shortest part of the visit; verifying identification, examining the lock and testing the door afterwards take a share of the time too. A standard knob or deadbolt on a well-fitting door is generally a matter of minutes, while a high-security cylinder, a frozen lock or a swollen door takes longer. If a cylinder has to be drilled and replaced, or locks are rekeyed while the locksmith is there, allow extra time for that work.
A standard strike is a thin plate held by two short screws in the jamb, and the jamb is what splits when a door is forced. A reinforced strike or strike box is heavier and is fixed with long screws that pass through the jamb into the framing, spreading the load into the structure. It is one of the most effective upgrades on any exterior door and is usually fitted as part of a deadbolt replacement.
Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.
Yes. A compartment door that has been pried at, dropped on a loose hinge, or pushed out of square over time is straightened or adjusted as part of the same visit, since a bent door will fight even a brand new lock. The door is worked back into alignment, the hinge or latch checked, and the new lock fitted only once the door closes flush again.
Drilling is chosen when the gentler options for that specific lock, manipulation and decoding on a mechanical dial, or a manufacturer reset or override on an electronic one, are unavailable or have not worked, rather than following one fixed order on every safe. It is also the answer when the lock has genuinely failed, such as a seized wheel pack or a dead circuit board with no working override. The decision is explained before drilling starts, not discovered afterward.
On-site assessment preferred
Describe the problem; we'll take it from there. Talk to a locksmith about it.
Open 24/7 · same fees any hour
On-site assessment preferred · (289) 804-2598 · open 24/7
